HP 9000 Series 700 Manual page 169

-t range
-f
object The
information or networking events are listed. The syntax is:
dtc
board
Specifies the range of dates and times to be displayed. The dates are in a free
format, such as month-day-year all in numbers or in words. For example,
and
1997 Wed Apr 9 1997
marks (") are used to delimit a range.
Displays events that were logged between
date1<date2
date2
Displays events that were logged on
<date1
Displays events that were logged on
date1<
Displays events as they are logged.
parameter specifies the DTC, board, or port to be listed. Configuration
object
[ dtc [ board [ port ]]]
Specifies the name of the DTC for which to list configuration information or
networking events. Use the same DTC name as you used when adding the
DTC using dtcconfig. A DTC name consists of up to 8 alphanumeric
characters, including hyphens (-) and underscores (_). The first character
must be alphabetic.
If you specify the DTC name without the
the display is a rear panel summary, a list of the CPU/LAN or LAN
parameters, and a list of the parameters of each configured port.
This parameter is optional.
The board on the specified DTC. Although this value is optional, you can
specify it only if the
dtc
If you specify a board name without the
board summary and list of the parameters of each configured port (if it is not
the CPU/LAN or LAN board).
The board parameter is one of the following:
C or c CPU/LAN on a DTC 48 or DTC 16
L or l LAN on a DTC 72MX or DTC 16TN
B or b board of a DTC 16TN (a DTC 16TN has no separate
boards)
0 ... 5 board number for a DTC 48
are two ways to specify the same date. Quotation
including those dates.
or
board
parameter is also specified.
parameter, the display is a
port
Using dtclist
8 Apr
and
date1
and earlier.
date1
and later.
date1
parameters, then
port
169
14