HP 9000 Series 700 Manual page 113

1 Select Modify Default Parameters from the dtcconfig main menu.
The Modify Default Parameters Menu appears.
2 Choose one of these menu items and press the Select Item (F4) function key.
3 Enter new values to create your user defaults, or choose the HP defaults.
4 After entering values, press the (F4) key.
The new user defaults are now effective and you return to the main menu.
Modify Default Parameters menu
tsta195:root:/opt/dtcmgr/sbin
Modify Default Parameters Menu
Highlight an item and then press "Return" or "Select Item" (F4).
Configure Global Parameters ...
Configure TCP Parameters ...
Configure DNS/IP Parameters ...
Configure SNMP/MIB Data Parameters ...
Configure DTC Management Protocol Parameters ...
Configure Terminal Port Parameters ...
Enable Terminal Port Options ...
Configure Printer Port Parameters ...
Enable Printer Port Options ...
Help Shell
Modifying the default parameters
tsta195:root
Select
Item
9
Previous
Menu
113