Table of Contents
Advertisement
About dtcdiag
13
Note
Once you have executed dtcdiag, you cannot stop it. You can kill the dtcdiag
process, but you cannot stop the operation from completing.
The dtcdiag command completes execution on a DTC even if it is killed (by using
CTRL-C) before it is able to report the completion status. The dtcnmp process
continues the execution of the dtcdiag command.
You can only run one of the following commands at a time: dtcdiag (or synonym),
dtcconfig, dtcmodifyconfs (or synonym), or dtcping.
Refer to the dtcdiag man pages for a complete description of command parameters.
151
Advertisement
Table of Contents
