Jensen VX7021 Operation Manual page 55

Touch the "Pair" icon on the unit' s Bluetooth® user interface screen.
A prompt to pair or bond should appear on your mobile phone. Accept the
request and initiate the process.
A prompt to enter a PIN number or passkey for the unit should appear. The
default passkey for the unit is "0000".
At this point a prompt stating pairing successful should appear. Another
prompt should appear asking connect to the unit, Yes or N . Touch Yes. The
mobile phone and the unit should connect. The mobile phone should display
a message similar to "Device Connected" and the mobile phone and the unit
are now connected.
When connected to a Bluetooth® mobile phone, the unit will mute audio output,
pause CD play, and change to the Bluetooth® screen below when a call is received.
The incoming phone number or assigned name for that number will appear on
the screen. An audible tone will sound from the unit and a graphic display will
appear on the front panel.
1. icon: Touch to answer an incoming call.
2. icon: Touch to end an incoming call.
will appear on the mobile phone list of devices.