Side Connections - Philips 32PW8808/79R Instruction Manual

AV3/AV4 Digital High Definition input
Y RGB
AUDIO
Pb L
Pr R
AV 4
IN
AV3/AV4 input connectors will accept the
following signals from HD set top box (HD-STB)
decoders and progressive scan DVD players:
ED 480p
HD 1080i
HD 576p
AV3/AV4 input connectors also accept the following
1250 line HD display formats (available on selected
HD-STB decoders) as detailed in the Australian DTV
Receiver Standards:
HD 1152i (1250)
HD 1080i (1250)

Side connections

&
Connect your camera or camcorder to sockets
at the right side of your TV.
é
Connect the equipment to
3 for mono equipment. For stereo
AUDIO L
equipment also connect
S-Video quality with an S-VHS, Hi-8 or Digital
camcorder is obtained by connecting the
S-Video cables with the
(instead of
VIDEO
3.
Note: If you prefer, you can also connect the
camcorder to one of the TV's rear
Connect Peripheral equipment
18
Y
AUDIO
Pb L
Pr R
VIDEO 2Fh
480p/1080i
AV 3
IN
31.470 kHz 60 Hz
33.750 kHz 60 Hz
31.250 kHz 50 Hz
31.250 kHz 50 Hz
31.250 kHz 50 Hz
1
2
3
2 and
VIDEO
3.
AUDIO R
input 1
S-VIDEO
2) and
inputs
AUDIO
jacks.
AV IN
Connect the equipment with 2 Fh RGB output to
the connector and to the
RGB
jacks of .
AV3
Connect the equipment with 2Fh YPbPr output to
the Y, Pb and Pr jacks and to the
jacks of .
AV4
See also the manual of your High Definition
equipment.
Inputs AV3 and AV4 also allow horizontal and
vertical picture shift using the remote control
cursor left/right, up/down.
Note:
- 60 Hz normally refers to USA markets and 50 Hz to
UK, Europe and Australian markets.
- The AV3 RGB (D-15) connector will accept only the
signal standards 480p/60 Hz, 1080i/50 Hz and
1152i/50 Hz and is only for TV standards.
It is not a PC connector.
Warning: in case you notice scrolling images, wrong
colours or no colour, no picture, or even combinations of
these on your screen, check if the connections are done
in the right way.
Headphone
& Insert the plug into the headphone socket L
at the right side of the TV.
é Press ¬ on the remote control to switch off
the internal loudspeakers of the TV.
The headphone impedance must be between 8
and 4000 Ohm. The headphone socket has a 3.5
mm jack.
In the menu select
SOUND
to adjust the headphone volume.
volume
and
L R AUDIO
and
L R AUDIO
Headphone