Table of Contents
Advertisement
Maintenance and repair operations, removal of components
Many air conditioning components can be removed without
removing the instrument panel.
The following components can be replaced with the instru-
ment panel installed:
•
Heat exchanger.
•
A/C servomotors.
•
Fresh Air Blower V2.
•
Instrument Panel Temperature Sensor G56.
In most cases, the components can be accessed after
taking out the driver side instrument panel cover or knee
airbag or after removing the glove compartment.
Dust and pollen filter
The procedure for removing and installing the dust and
pollen filter is the same as for the Audi A3. The filter
service cover is located inside the glove compartment.
If the dust and pollen filter is heavily clogged, falling dirt
particles can damage Fresh Air Blower V2.
To avoid this, it is recommended that cover plate T10532
be positioned below the dust and pollen filter before
removing the filter.
The following special tools are required for removing the
dust and pollen filter:
•
Hook T40207 (this is only needed if there is no hook
on the service cover).
•
Vacuum cleaner.
•
Cover plate T10532.
Left Temperature Control
Door Motor
V158
Front Air Distribution Door Motor
V426
Service cover
Pollen filter
Fresh Air Blower
V2
630_068
630_069
57
Hide quick links:
Advertisement
Table of Contents
