Table of Contents
Advertisement
Operation of K145 with Passenger Occupant Detection System Control Module J706
•
If the ignition is switched on and the front passenger
seat is occupied by an adult, the OFF warning lamp lights
up for about four seconds during the initialization phase
as a self-test. The ON warning lamp is then lit continu-
ously.
The PASSENGER AIRBAG text display is lit continuously
when the ignition is on.
Operation of the warning lamp in response to a change of status
•
If the status of the front passenger airbag changes from
ON (seat occupied) to OFF (seat vacant) while the ignition
is on, the ON warning lamp goes out. At the same time,
the OFF warning lamp flashes for about five seconds and
then lights up continuously.
Display operation after switching the front passenger airbag on and off
Terminal 15
ON
OFF
Front Passenger
Occupant Detection
"Occupied"
Sensor
G128
"Vacant"
Warning lamp
ON
ON
OFF
Warning lamp
ON
OFF
OFF
Text
ON
PASSENGER AIRBAG
OFF
Initialization phase (4 sec.)
•
If the ignition is switched on and the front passenger
seat is vacant or occupied by a child seat, the ON
warning lamp lights up for about four seconds during
the initialization phase as a self-test. The OFF warning
lamp is then lit continuously.
•
If the status of the front passenger airbag changes from
OFF (seat vacant) to ON (seat occupied) while the igni-
tion is on, the OFF warning lamp goes out. At the same
time, the ON warning lamp flashes for about 5 seconds
and then lights up continuously.
flashes for 5 sec.
flashes for 5 sec.
Initialization phase (4 sec.)
630_044
19
Hide quick links:
Advertisement
Table of Contents
