Margin Adjustment (Second Side) - Canon AM1 Service Manual

NOTE:
When the cassette positions are uneven due to the
mechanical adjustment, adjust them by loosening the
screw on both left and right sides.
1x
1x
side)
1x
1x
57
Margin Adjustment (Second
1. Make 2-sided copies using the Cassette 3 and check
that the left edge margin is 2.5 +/- 2.0 mm.
Feeding direction
of paper
2. As for nonstandard, change the left edge margin
adjustment value for the second side of the 2-sided
copy from the Cassette 3.
Service Mode (level1) > COPIER > ADJUST > FEED-
ADJ > ADJ-C3RE and set 1 value larger, the left edge
margin becomes 0.1mm larger.
3. Enter the value set to the left edge margin
adjustment value for the second side of the 2-sided
copy from the Cassette 3 as the side registration
adjustment value for the second side of the 2-sided
copy from the Cassette 4.
Service Mode (level1) > COPIER > ADJUST > FEED-
ADJ > ADJ-C4RE
4. Make 2-sided copies using the Cassette 4, and check
that the left edge margin is 2.5 +/- 2.0 mm.
5. As for nonstandard, change the left edge margin
adjustment value for the second side of the 2-sided
copy from the Cassette 4.
As making the following selection: Service Mode (level1)
> COPIER > ADJUST > FEED-ADJ > ADJ-C4RE and
set 1 value larger, the left edge margin becomes 0.1mm
larger.
6. Enter the new adjustment value on the Service
Label.
• ADJ-C3RE
• ADJ-C4RE
7. Get out from the service mode.
Installation
image