Overview - Fujitsu PG-126 User Manual

1 Overview

This card is for use with the PRIMERGY (simply called "SERVER"). The card
functions as an interface between the SERVER PCI bus and SCSI devices.
This card incorporates the SCSISelect utility, which lets you easily change the card
settings.
The summarized specifications are given below:
Manufacturer's device type
Card type
Bus interface
Data transfer system
SCSI controller
Number of SCSI channels
Maximum transfer speed
Connector
Notes
・ Since this card places a restriction on the SCSI connectors that can be
used by the SERVER, refer to the documentation for the SERVER before
connecting the SCSI connector.
・ For operating this card under the cluster configuration, use the device
driver referring to the instructions of the cluster kit.
Summarized specifications
ＡＨＡ−２９４０Ｕ２Ｗ
SCSI-3 compliance
PCI V2.1 compliance
Bus master DMA
ＡＩＣ−７８９０
One channel per card
Synchronous: 80 MB/s; and asynchronous: 6 MB/s
Internal SCSI 68-pin 16-bit connector (ULTRA2)
Internal SCSI 68-pin 16-bit connector (ULTRA) (not
supported)
Internal SCSI 50-pin 8-bit connector (ULTRA) (not
supported)
External SCSI 68-pin 16-bit connector (ULTRA2)
E
1