Ethernet Port Settings - Panasonic KX-HDV430 Administrator's Manual

Default Gateway
Description
Value Range
Default Value
Configuration File Reference
Auto DNS via DHCP
Description
Value Range
Default Value
Configuration File Reference
DNS1
Description
Value Range
Default Value
Configuration File Reference
DNS2
Description
Value Range
Default Value
Configuration File Reference

4.3.2 Ethernet Port Settings

This screen allows you to change the connection mode of the Ethernet ports, LLDP and the VLAN settings.
Document Version 2016-05
Specifies the default gateway for IPv6.
Note
•
This setting is available only when [Connection Mode] is set
to [Static].
Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]
Not stored.
STATIC_GATEWAY_IPV6
Selects whether to enable or disable the DNS server obtained by
DHCPv6.
Note
•
This setting is available only when [Connection Mode] is set
to [DHCP].
•
Yes: Use DNS obtained by DHCPv6
•
No: Not use (use static DNS)
Yes
DHCP_DNS_ENABLE_IPV6
Specifies the IP address of primary DNS server for IPv6.
Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]
Not stored.
USER_DNS1_ADDR_IPV6
Specifies the IP address of secondary DNS server for IPv6.
Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]
Not stored.
USER_DNS2_ADDR_IPV6
4.3.2 Ethernet Port Settings
Administrator Guide 67