Panasonic KX-HDV430 Administrator's Manual page 282

5.3.33 Tone Settings
Default Value
HOLD_TONE_FRQ
Value Format
Description
Value Range
Default Value
HOLD_TONE_GAIN
Value Format
Description
Value Range
Default Value
BELL_CORE_PATTERN1_TIMING
Value Format
Description
Value Range
Default Value
BELL_CORE_PATTERN2_TIMING
Value Format
Description
Value Range
Default Value
BELL_CORE_PATTERN3_TIMING
Value Format
282 Administrator Guide
0
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of the hold tone using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
425
INTEGER
Specifies the gain, in decibels, of the hold tone.
-24–24 (dB)
0
Comma-separated Integer
Specifies the cadence, in milliseconds, of pattern ID 1, described in
the LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section
14, using up to 8 whole numbers (on 1, off 1, on 2, off 2...) separated
by commas.
0–5000 (0: Continuous)
Note
•
Avoid setting 1–50 for any of the values.
2000,4000
Comma-separated Integer
Specifies the cadence, in milliseconds, of pattern ID 2, described in
the LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section
14, using up to 8 whole numbers (on 1, off 1, on 2, off 2...) separated
by commas.
0–5000 (0: Continuous)
Note
•
Avoid setting 1–50 for any of the values.
800,400,800,4000
Comma-separated Integer
Document Version 2016-05