5.3.27 SRTP Settings
Value Range
Default Value
Web User Interface Reference
SRTP_MIX_CONFERENCE_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
SRTP_MIX_TRANSFER_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
SRTP_HELD_CALL_RTP_ENABLE
Value Format
260
Administrator Guide
•
0: SRTP
•
1: RTP/SRTP
•
2: SRTP&RTP(Panasonic PBX only)
Note
•
0: Use only SRTP for outgoing and incoming calls.
•
1: Use only RTP for outgoing calls, and RTP or SRTP for
incoming calls.
•
2: Use RTP or SRTP for both outgoing and incoming calls.
This value is valid only when the unit is connected to a
Panasonic PBX. "SRTP_MIX_TRANSFER_ENABLE_n" must
also be set to "Y".
1
SRTP Mode
SRTP_MIX_CONFERENCE_ENABLE_1,
SRTP_MIX_CONFERENCE_ENABLE_2, ...,
SRTP_MIX_CONFERENCE_ENABLE_16
BOOLEAN
Specifies whether to allow conferences where each participant can
use either SRTP or RTP.
•
Y: Enable
•
N: Disable
N
Enable Mixed SRTP & RTP by Conference
SRTP_MIX_TRANSFER_ENABLE_1,
SRTP_MIX_TRANSFER_ENABLE_2, ...,
SRTP_MIX_TRANSFER_ENABLE_16
BOOLEAN
Specifies whether to allow call transfers between a user who is using
SRTP and a user who is using RTP.
•
Y: Enable
•
N: Disable
N
Enable Mixed SRTP & RTP by Transfer
BOOLEAN
Document Version 2016-05