Bissell PET HAIL ERASER 1650 SERIES Quick Start User Manual page 14

Cleaning Inner Cyclone Separator
1
Push Empty
Tank Button
to access
Inner Cyclone
Separator.
Maintain the Pet TurboEraser® Tool
1
3
To reassemble, align two clips on each end
of paddle wheel with belt on and pop back
into place.
Place brush roll with belt back in.
Faceplate will not close properly if all parts
are not aligned correctly.
14
www.BISSELL.com
2
Twist counter-clockwise
to remove seperator
from dirt container and
pull down.
Twist gray collar
counter-clockwise, until
slot appears, and then
separate faceplate.
3
Tap separator against
inside of trash bin and
rinse under warm water if
necessary. Be sure to let
it completely dry before
placing back in Dirt
Container.
Paddle Wheel
2
Belt
Roller
Remove brush roll, belt, and paddle
wheel. Inspect for damages and replace
if necessary.
4
To put faceplate back on, align the tabs
in the top of the cover and place it down
to "click" into place.