Remote Control Functions - Philips 21PT5006 User Manual

(Refer to the correct page for the remote control that came with your set)
Personal Zapping
You can surf up to 10 personal
channels for each key (p. 26)
Sleeptimer
To select a time period after
which the set switch to standby
mode automatically.
Add Personal Zapping list
Adds and stores channels into
Personal Zapping list (p. 26)
Smart Sound
Used to access a series of
stored settings:Theatre, Music,
Voice or Personal.
To call up or exit menus.
These 4 keys are used to move
around the menus or provide
direct access to the different
picture formats
To adjust the sound level.
Digit keys
Direct access to the channels.
For a 2-digit channel, enter the
2nd digit before the dash
disappears.
Alternate channel
Switches between the current
and the previous channel.

REMOTE CONTROL FUNCTIONS

Menu
Cursor
Volume
POWER
A/ C
9
Standby
Lets you place the TV set on
standby. To turn on the TV, press
CH + or –, , AV, A/CH or
digit keys.
AV channel selection
Press several times to select AV1,
CVI,AV2,YPbPr or Side.
Delete Personal Zapping list
Deletes stored channels from
Personal Zapping list (p. 26)
Smart Picture
Used to access a series of
stored settings: Rich, Natural,
Soft, DVD/ VCD or Personal.
Incredible Surround
To enable/disable the Incredible
Surround feature. In stereo, the
speakers appear further apart. In
mono, a pseudo-spatial effect is
obtained.
During stereo transmission, to
switch from Stereo to Mono.
During dual sound transmission,
to switch betwen language
.
Channel selection
To access the next or previous
channel.The number and sound
mode are displayed for a few
moments whenever you select a
new channel.
Mute
To mute or restore sound.
On screen display
To display/clear the on screen
information. Hold down key for
3 seconds to activate permanent
display of channel number.This
key is also used to exit from the
menu.
or