Vpap St-A Basics - ResMed VPAP ST-A User Manual

VPAP ST-A basics

Start/Stop
button
Key
Start/Stop button
Info menu button*
Setup menu button*
Push dial
Alarm mute button
Advanced Info menu
+
Clinical Setup menu
+
LCD screen
Alarm LED
Therapy LED
*The Info and Setup menus are disabled if S9 Essentials is enabled.
Info menu button
LCD screen
Setup menu button
Function
Starts or stops treatment.
Power Save mode—hold for three seconds
Allows you to view your sleep statistics or to exit from the menu.
Allows you to make changes to settings or to exit from the menu.
Turning the dial allows you to scroll through the menu and change
settings. Pushing the dial allows you to enter into a menu and
confirm your choice.
Press once to mute alarms. Press a second time to un-mute. If
the problem is still present, the alarm will sound again after two
minutes.
Allows you to access the Advanced Info menu by pressing and
holding the Info menu and Setup menu buttons for three seconds.
Allows you to access the Clinical Setup menu by pressing and
holding the Setup button and push dial for three seconds.
Displays the menus, treatment screens and reminders.
Backlight—when treatment is being delivered, the backlight
(including the Start/Stop button) automatically turns off after
30 seconds, otherwise it turns off after 3 minutes.
Yellow LED—flashes during an alarm.
Blue LED—always on during therapy (if enabled in the Options
menu).
Alarm mute
button
Push dial
Alarm and
therapy LEDs
17
English