Manually Install Channels - Philips 19PFL5403/60 User Manual

In addition to menu language, you can
configure the following language settings via the
Language menu (digital channels only):
• Preferred audio
one of the available audio languages as
your preferred audio language. For more
information, see Section 5.3 Adjust sound
settings.
• Preferred subtitle language:
of the available subtitle languages. For more
information, see Section 5.8 Select a subtitle
language on digital TV channels.
• Hearing impaired: If available, select On
to display the hearing impaired subtitle with
your preferred language.
• Audio description:
to hear the audio description with your
preferred language.
Step 2 Select your country
Select the country where you are located. The
TV installs and arranges channels according to
your country.
1. In the Install menu, press
Country.
2. Press to enter the list.
3. Press or to select your country.
4. Press to return to the Install menu.
Step 3 Install channels
Your TV searches and stores all available digital
and analogue TV channels as well as all available
digital radio channels.
1. In the Install menu, press
Channel installation > Automatic
installation.
2. Press to select Start now.
3. Press OK.
4. Press the green key to start.
The installation may take a few minutes.
language: Select
Select one
If available, select On
to select
or to select
5. When the channel search is completed,
press the red key to return to the
Installation menu.
6. Press MENU to exit.
Tip: When digital TV channels are found,
E
the list of installed channels may display
empty channel numbers. If you want
to rename, reorder or uninstall stored
channels, see Section 6.3 Rearrange channels.
6.2

Manually install channels

This section describes how to search and store
analogue TV channels manually. If you want to
search and store digital channel, please kindly
refer to Section 6.7. Test digital reception
Step 1 Select your system
D Note: Skip to Step 2 Search and store new TV
channels if your system settings are correct.
1. Press MENU on the remote control and
select Install > Channel installation >
Analogue: Manual installation.
2. Press to enter the Channel
installation menu, and System is
highlighted.
3. Press to enter the System list.
Channel installation
Automatic insatllation
Installation update
Digital: Test reception
Analog: Manual installation
Rearrange
4. Press or to select your country or
region.
5. Press to return to the Channel
installation menu.
Analog: Manual installation
System
Search
Fine tune
Store current channel
Store as new channel
EN-23