Rearrange Channels; Rename Channels; Uninstall Or Reinstall Channels - Philips 19PFL5403/60 User Manual

Step 2 Search and store new TV channels
1. Press MENU on the remote control and
select Install > Channel installation
> Analogue: Manual installation >
Search.
2. Press to enter the Search menu.
3. Press the red key and the number keys on
the remote control to enter the three digit
frequency. Alternatively, press the green
key to automatically search for the next
channel.
4. Press when the new channel is found.
5. Select Store as new channel, and press
to enter.
6. Press OK to save this channel.
The channel number will is shown on the
screen.
7. Press MENU to exit.
Fine tune analogue channels
You can manually fine tune analogue channels
when reception is poor.
1. Press MENU on the remote control and
select Install > Channel installation >
Analogue: manual installation > Fine
tune.
2. Press to enter the Fine tune menu.
3. Press or to adjust the frequency.
4. Press OK when done.
5. Select Store current channel to store
the fine tuned channel under the current
channel number.
6. Press to enter.
7. Press OK.
8. Press MENU to exit.
6.3

Rearrange channels

1. Press MENU on the remote control and
EN-24
select Install > Channel installation >
Rearrange.
2. Press to enter the Rearrange list.
3. Press or to select the channel you
want to rearrange.
4. Press the yellow key to move the channel
up the list, or press the blue key to move
the channel down the list.
5. Press MENU to exit.
6.4

Rename channels

1. Press MENU on the remote control and
select Install > Channel installation >
Rearrange.
2. Press to enter the Rearrange list.
3. Press or in the Rearrange list to
select the channel you want to rename.
4. Press the red key.
5. Press and to select characters or
and to change the characters. Space,
numbers (0-9) and other special characters
are located between z and A.
6. Press the green key or
Tip: Delete all characters by pressing the
E
yellow key. Delete only the highlighted
character by pressing the blue key.
6.5 Uninstall or reinstall
channels
1. You can uninstall a stored channel or
reinstall an uninstalled channel.
Press MENU on the remote control and
select Install > Channel installation >
Rearrange.
2. Press to enter the Rearrange list.
3. Press or to select the channel you
want to uninstall or reinstall.
4. Press the green key to uninstall or reinstall
OK to finish.