Pentair SAND DOLLAR Installation And User Manual page 4

Top mount sand filter
Hide thumbs Also See for SAND DOLLAR:
Table of Contents

Advertisement

iii
IMPORTANT WARNING AND SAFETY INSTRUCTIONS
local codes and ordinances. Improper installation may create an electrical hazard which could
result in death or serious injury to pool users, installers, or others due to electrical shock, and may
also cause damage to property.
must be used for each drain. Pools and spas should utilize a minimum of two drains per pump.
If a drain cover becomes loose, broken or is missing, close the pool or spa immediately and
shut off the pump until an approved anti-entrapment drain cover is properly installed with the
manufacturer's supplied screws.
For information about the Virginia Graeme Baker Pool and Spa Safety
Act, contact the Consumer Product Safety Commission at (301) 504-7908
or visit www.cpsc.gov.
Important Note: Always turn off all power to the pool pump before
installing the cover or working on any suction outlet.
SAND DOLLAR
and CRISTAL-FLO
®
High Pressure from the Sand Filter can cause severe injury or major
property damage due to tank separation.
Release all pressure and read instructions before working on the
sand filter.
If the filter clamp is adjusted under pressure, the tank can separate,
causing serious injury or major property damage.
BEFORE WORKING ON FILTER!
(1) Stop pump.
(2) Open air release valve.
(3) Release all pressure from system.
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION:
PUMPS REQUIRE HIGH VOLTAGE WHICH CAN SHOCK, BURN, OR
CAUSE DEATH.
BEFORE WORKING ON PUMP!
Always disconnect power to the pool pump at the circuit breaker
from the pump before servicing the pump. Failure to do so could
result in death or serious injury to service person, pool users or
others due to electric shock.
A pool or spa pump must be installed by a qualified pool and spa service
professional in accordance with the National Electrical Code and all applicable
Pumps are not a substitute for properly installed and secured pool drain
covers. An ANSI/ASME A112.19.8 approved anti-entrapment drain cover
II Top Mount Sand Filter Installation and User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cristal-flo ii

Table of Contents