Siemens ET 200SP Operating Instructions Manual page 105

Processing status of the telecontrol e-mails
The meaning of the status of the "PLC tag for processing status" is as follows:
Table 6- 2
Status
0000
82xx
8401
8403
8405
8406
8407
8408
8409
8410
8411
8412
8413
8414
8415
8416
8417
8418
8419
8420
8421
8450
84xx
8500
8501
CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1
Operating Instructions, 01/2017, C79000-G8976-C426-03
Meaning of the status ID output in hexadecimal format
Meaning
Transfer completed free of errors
Other error message from the e-mail server
Apart from the leading "8", the message corresponds to the three-digit error number of the
SMTP protocol.
No channel available. Possible cause: There is already an e-mail connection via the CP. A
second connection cannot be set up at the same time.
No TCP/IP connection could be established to the SMTP server.
The SMTP server has denied the login request.
An internal SSL error or a problem with the structure of the certificate was detected by the
SMTP client.
Request to use SSL was denied.
The client could not obtain a socket for creating a TCP/IP connection to the mail server.
It is not possible to write via the connection. Possible cause: The communications partner
reset the connection or the connection aborted.
It is not possible to read via the connection. Possible cause: The communications partner
terminated the connection or the connection was aborted.
Sending the e-mail failed. Cause: There was not enough memory space for sending.
The configured DNS server could not resolve specified domain name.
Due to an internal error in the DNS subsystem, the domain name could not be resolved.
An empty character string was specified as the domain name.
An internal error occurred in the cURL module. Execution was aborted.
An internal error occurred in the SMTP module. Execution was aborted.
Requests to SMTP on a channel already being used or invalid channel ID. Execution was
aborted.
Sending the e-mail was aborted. Possible cause: Execution time exceeded.
The channel was interrupted and cannot be used before the connection is terminated.
Certificate chain from the server could not be verified with the root certificate of the CP.
Internal error occurred. Execution was stopped.
Action not executed: Mailbox not available / unreachable. Try again later.
Other error message from the e-mail server
Apart from the leading "8", the message corresponds to the three-digit error number of the
SMTP protocol.
Syntax error: Command unknown.
This also includes the error of having a command chain that is too long. The cause may be
that the e-mail server does not support the LOGIN authentication method.
Try sending e-mails without authentication (no user name).
Syntax error. Check the following configuration data:
Alarm configuration > E-mail data (Content):
Recipient address ("To" or "Cc").
•
Diagnostics and maintenance
6.4 Processing status of the telecontrol e-mails
105