Print Mode - FujiFilm INSTAX SQUARE SQ10 User Manual

Print Mode

Two print modes are available.
• Auto print mode
• Manual print mode (initial setting)
When the auto print mode is selected, printing starts immediately after the image is saved in the memory.
When the manual print mode is selected, the image is saved in the memory. You can select and print images later.
■ Auto Print Mode
Switch the print mode selector on the side to "AUTO".
The icon below appears on the shooting screen.
Printing starts immediately after the image is saved in the
memory.
■ Manual Print Mode (initial setting)
Switch the print mode selector on the side to "MANUAL".
The icon below appears on the shooting screen.
The image is saved in the memory. You can select and print
images later instead of printing them immediately.
EN
49