JRC JMA-993-SA Instruction Manual page 284

a a o a a a a a o a o a a o o o a a a a a a a a a o a a a a a a o o a a a e a
Adjustment of Performance Monitor (NJU-63/64)'
Set the radar to Master Radar when the Inte€witch is
installed.
Press I vnur I to display VRMI and set the range of VRM1 to
10-18* NM.
"
Set the range to 12 to 18 NM when a waveguide is installed between the
'scanner unit and
the transmitter-receiver unit. (X band radar)
*
Set the range to 12 to 1 8 NM when the transceiver unit is incorporated in
the scanner unit or in case of operating the S band radar.
Open the ADJUST Menu as directed in
Section 8.5, Adjustments.
Left-click on PM PRESET
The PM PRESET Menu will appear. The radar
will automatically be set to RM, OFF CNTER
OFF, IR OFF, PROCESS OFF, TGT ENH OFF,
FUNCTION OFF and 24 NM range.
Affix the INFORMATION LABEL as
supplied with the Performance Monitor
to a suitable position of the board side
of the Display Unit.
Write down the value of the "PM"
indicator in the TEST Menu and the
date of checking in the INFORMATION
LABEL.
ADJUST
l,TUNE
F63
2.BEARING
0.F359.9"
3.RANGE
0-999
4.ANTENNA
c.
6.
7.
ARPA
MBS
ISW
1------1-zEl
f--ooool
r_TT('EI
HEIGHT
E.PM PRESET I
--o=izi ---re
o.
EXTT
8-56