Canon EF70-300mm f/4-5.6 IS II USM Instructions Manual page 17

Lens Information Display
■ Information display method according to
camera type
When the lens information display is set to display
information (p. 13), display conditions differ
according to the type of camera (1 to 3 below) used.
1. When the lens is used with either a film
single-lens reflex camera or digital single-lens
reflex camera, the following operations will be
indicated on the lens information display for a
period of approximately 10 seconds.
Shutter button is pressed halfway/all the way
● ●
Display mode select button is pressed
● ●
(when pressed for under 2 seconds)
When the following operations are performed
● ●
while related operation information is being
displayed, they will be indicated for an additional
period of approximately 10 seconds beginning
from when such operation was initiated.
• Shutter button is pressed halfway/all the way
• Display mode select button is pressed (when
pressed for under 2 seconds)
• Manual focus operation
• Zooming
• Switching from Live View shooting to still-image shooting
• Switching from movie shooting to still-image shooting
2. When the lens is used with a digital single-
lens reflex camera, display is switched
to continuous display when the following
operations are performed.
When switching to Live View shooting
● ●
When switching to movie shooting
● ●
When set to movie shooting before turning
● ●
the camera <ON>.
To stop continuous display, press the display mode
select button for more than 2 seconds.
ENG-16