Canon EF70-300mm f/4-5.6 IS II USM Instructions Manual page 16

Lens Information Display
The focusing distance display and focal length
● ●
display are only to serve as guides.
When using the lens with a 35 mm full-format
● ●
camera and there is a difference between the
information displayed on the lens information
screen and the zoom ring indication, please
follow the zoom ring indication.
35 mm format conversion is not possible in the
● ●
following cases:
• When using the lens with either a EOS 5DS
or 5DS R camera which is set to 1.3x or 1.6x
crop shooting.
• When using the lens with any of the following
cameras: EOS D6000, EOS D2000, EOS DCS
1, and EOS DCS 3
• When focal length information is recorded in
image data (Exif data)
(3) Camera shake amount display mode
This mode is used to display the amount of
vertical and horizontal shake the camera and
lens are experiencing.
The camera shake amount display is to only
● ●
serve as a guide. Even if no shake is indicated, it
does not guarantee that images will be in focus.
The camera shake amount display uses
● ●
information from the sensor which activates the
Image Stabilizer. However, it does not indicate
the effectiveness of the Image Stabilizer.
Since the lens information display is located on
● ●
the lens, it is not possible to view the camera
shake amount information while using the
camera's viewfinder or LCD monitor. Therefore,
please use it as a guide to check how to hold the
camera and how to press the shutter button in
order to reduce camera shake.
ENG-15