Spektrum DX6i Manual page 122

Press the roller to access the Pitch Curve function.
Rotate the roller to highlight the desired pitch curve that you wish to adjust.
NORM- Normal
STUNT- Stunt mode
HOLD-
Press the roller to access the selected pitch curve.
Rotate the roller to select the pitch curve position that you wish to adjust. Note the graph. The vertical line
represents the selected position that you have chosen. Position options are:
L=
2=
3=
4=
H=
When selected press the roller to access the pitch value.
Rotate the roller to adjust the pitch value at the select stick position.
After the desired value is programmed press the roller to deselect the value.
Repeat this step for all stick positions and all flight modes.
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
Rotate the roller to highlight LIST then press the roller.
122
Reduce photo to 13.5%
PITC CUR
NORM + POS 3
STUNT
HOLD
Hold
Low throttle stick position
25% stick position
50% stick position
75% stick position
Full stick position
Reduce photo to 13.5%
PITC CUR
NORM + POS 3
STUNT
HOLD
List
50.0%
List
50.0%