3. Disassembly and Assembly
This section describes the disassembly and reassembly sequences for this monitor.
Warning:
As this monitor has parts that are sensitive to static electricity, be careful when handling them.
3-1. Disassembly
Caution:
1. Turn the monitor off before beginning the disassembly process.
2. When disassembling the monitor, do not use any metal tools except for the provided jig.
3. Remove the signal cable and the power cord before beginning the disassembly.
Description
1. Place monitor face down on cushioned table.
Remove Stand, then remove 2 marked screws
from the rear cover.
Caution : If you do not tilt the stand and use too
much force to remove it, the connection
pin may break.
2. Remove the cover and the LCD panel using the
provided jig on both grooves at the bottom.
3. Disassembly and Assembly
Photo
Screws