Advertisement
Accessories
Included:
Four "AA" Alkaline batteries, Certificate of Calibration
mV Wire Kit
1 Red & 1 Black Lead with Retractable Shield Banana Plugs & Alligator Clips
Optional:
T/C Wire Kit 1 for Types J, K, T & E
T/C Wire Kit 2 for Types B, R/S & N
Individual T/C wire
Three feet (1 meter) of T/C extension wire, stripped on one end with a miniature
T/C male connector on the other end
Rubber Boot
Small Carrying Case (fits unit with or without boot)
Ni-MH 1 Hour Charger with 4 Ni-MH AA Batteries
(100-120 V AC input for North America Only)
More Than a Simple Boot
The optional boot provides
more than just protection. Flip
out the tilt stand and free up
both hands for calibration
adjustments.
Page 8
Part Number
020-0207
Part Number
020-0202
020-0203
020-0210-*
*Insert T/C Type J, K, T, E, N, R/S or B
HH500A-RB
SC-HH500
020-0103
(Shown without optional boot)
Product Description
• Easy to use
With the OMEGA CL540A Series you can check & calibrate all your thermocouple instruments.
• Take it without into the shop, plant or field
Carry it without worry - protect it with an optional rubber boot and rugged, low profile switches.
Easy to operate even in the dark areas of the plant with the backlit display.
• Calibrate directly in temperature (°C & °F)
Stop carrying around a millivolt source and thermocouple tables. The OMEGA CL540A Series
works with the thermocouples you use including types J, T, E, K, R, S, B, N, G, C, D, L (J-DIN), U
(T-DIN) and Platinel II. Easily set any value quickly to within 0.1° with the adjustable digital
potentiometer "DIAL" plus store any three temperatures for instant recall with the DIAL switch.
• Compatible with all process instruments
Connect directly to the thermocouple inputs of smart transmitters, PLCs, DCS and multichannel
recorders and verify their outputs or displays.
Page 1
Advertisement
