Multi-Purpose Foot + Gathering - Bernina Overlocker Plus Workbook

Hide thumbs

Table Of Contents

Table of Contents

BERNINA

Overlocker Workbook 2

Fabric:

Medium weight cotton, 3" x 18"

Medium weight cotton bias strip, 2" x 8"

12" length of ⅜" cotton filler cord

Needle:

80/12 Universal

Thread:

4 cones of overlocker thread

Presser Foot:

Multi-Purpose Foot + Gathering Attachment

Stitch:

4-thread overlock

Set the overlocker for a 4-thread overlock. Adjust settings as

directed below.

Attach the Multi-Purpose Foot only (no guide), following the

directions in the instruction manual for the Multi-Purpose Foot

with Guide.

Slip the Gathering Attachment on to the fixing screw and metal

post directly behind the fixing screw. Hint: Place the horseshoe

-shaped slot over the screw, then rotate the attachment to lock

over the metal post. Tighten fixing screw. Note: 700D and

800DL also need the Attachment Base.

Wrap the bias strip around the cord and place the wrapped

cord in the groove under the foot with the raw edges to the

right.

Take 2 or 3 stitches into the fabric and lower the needles into

the fabric.

Place the 3" x 18" fabric under the Gathering Attachment and

next to the needles.

Overlock, covering the cord, gathering the fabric strip and

seaming all layers together.

7/01/16