Mounting The Device - Siemens SIMATIC TP700 Comfort Outdoor Compact Operating Instructions

Mounting depth
The mounting depth of the devices is:
HMI device
TP700 Comfort Outdoor
TP1500 Comfort Outdoor
3.2

Mounting the device

Positions of the mounting clips
To achieve the degree of protection for the HMI device, the positions for the mounting clips
shown below must be adhered to.
The positions of the mounting clips are marked by stamps on the cutouts. Fit the mounting
clips in all the stamped cutouts.
The following table shows the type, number, and position of the mounting clips needed for
the respective HMI devices.
HMI device
TP700 Comfort Outdoor
TP1500 Comfort Outdoor
Requirement
● All packaging components and protective films were removed from the HMI device.
● To install the HMI device, you need the mounting clips from the accessories kit.
● The mounting seal must be installed on the HMI device.
TP700 Comfort Outdoor, TP1500 Comfort Outdoor
Compact Operating Instructions, 05/2016, A5E35956909-AC
Mounting and connecting the HMI device
Mounting depth
67 mm
77 mm
Mounting clips
Type Number
Aluminum 8
mounting clip
Steel 12
mounting clip
3.2 Mounting the device
Position on the HMI device
19