Omron SYSMAC C2000H Operation Manual page 7

1--4--1 AD001 through AD005 Analog Input Modules
1--4--2 AD006 and AD007 Analog Input Modules
1--4--3 AD101 Analog Input Modules
1--4--4 DA001 through DA005 Analog Output Modules
1--4--5 DA101 Analog Output Modules
Each of these Analog Input Modules is allocated two words, one for each
analog input point. Word n is for point 1, and word n+1 is for point 2. Each of
these words contains the decimal-converted value for the analog input point.
Each of these Analog Input Modules is allocated four words, one for each
analog input point. Word n is for point 1, word n+1 is for point 2, word n+2 is
for point 3, and word n+3 is for point 4. Each of these words contains the
decimal-converted value for the analog input point.
Each of these Analog Input Modules is allocated either two or four words,
depending on the switch settings. The operation of the Module is completely
different depending on this switch setting. Refer to later sections of this man-
ual for details.
Each of these Analog Output Modules is allocated two words, one for each
analog output point. Word n is for point 1; word n+1 is for point 2. Each of
these words contains the digital-converted value for the analog output point.
Each of these Analog Output Modules is allocated four words, one for each
analog output point. Word n is for point 1, word n+1 is for point 2, word n+2 is
for point 3, and word n+3 is for point 4. Each of these words contains the dig-
ital-converted value for the analog output point.
Section 1--4