Swing-out frame
The swing-out frame inside the auxiliary control cubicle provides space for the
inverter unit control board, control electronics of the drive, I/O terminal blocks, and
optional electrical equipment. The lead-throughs for I/O cables, the auxiliary voltage
transformer, and further space for additional equipment are available behind the
frame. The frame can be opened by removing the two locking screws and moving
the swing-out frame aside. (Depending on selected options, actual equipment of the
drive may differ from what is depicted below.)
control board with
I/O terminal blocks
Terminal block X1
Branching unit
(needed when
there are more
than one supply
Inverter unit
unit)
Terminal block X2
(optional)
Switch for auxiliary
voltage
24 V DC
Buffering module
for auxiliary
voltage
24 V DC / 20 A
Hardware description
31