Philips 8846XL Manual page 17

8845XL 8846XL.QXD
C
1
2
C
2/25/04 3:44 PM
Make sure that the two pointy edges of the comb
fit into the recesses.
7 Repeat the process for the other two sets
of cutters and combs.
8 Replace the frame.
9 Press down and turn wheel clockwise until
it locks into place.
10 Replace the Razor Head Assembly back on
razor.
Once A Month: Razor Heads
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Norelco Razor Cleaner, model RC1776, or
rubbing alcohol ) and lubricated, with Norelco
Razor Lubricant, model AL80, or one drop of
mineral oil (in the center of the head).This helps
prevent wear of the shaving heads.
After Each Use:Trimmer
1 Turn razor OFF.
2 Push Trimmer Slide Switch up to pop up
Trimmer.
3 Clean Trimmer with the brush every time
you use it.
Page 17 (Black plate)
ENGLISH
17