Locating A Handset ("Paging") - Gigaset A390 Manual

Setting up the answer
machine
The answer machine has already been pre-
set at the factory. Make individual settings
using the handset.
Details on how to set a delay time, after
which the answer machine is to answer a
call, as well as details on how to set the
recording length and activate call screen-
¢
ing during the recording, are available from
the Menu tree
Using key 1 for fast access to
the answer machine (network
mailbox)
Simply press and hold key
set and you will be connected directly to
¢
the answer machine (network mailbox).
See Menu tree
Remote operation when on
the move
You can check and activate your answer
machine from any other telephone (hotel,
pay phone etc.).
Preconditions:
◆
¢
You have set a system PIN other than
0000 page 20.
◆
The phone you are using for remote
operation has touch tone dialling
(DTMF), i.e. you hear different tones
when you press the keys.
page 19.
1
on the hand-
page 19.
13
Calling the answer machine and
playing back messages
~
(Dial your own number)
to your announcement: press the
enter the system PIN
The following keys are used for operation:
A
Go to the start of the current mes-
sage.
Press twice to go back to the previous
message.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
Delete current message.
Activating the answer machine
~
(Enter your own number and allow the
phone to ring until you hear the message:
"Please enter PIN")
Your answer machine is activated. It tells
you how much memory time is left. The
messages are now played back. The answer
machine cannot be deactivated remotely.
Locating a handset
("paging")
You can locate your handset using the base
station.
◆
Briefly press the registration/paging
key on the base station (
◆
All handsets will ring simultaneously
("paging"), even if the ringer tones are
deactivated.
End paging: briefly press the register/pag-
ing key on the base station (
c
the talk key
¢
while listening
9
¢
~
enter system PIN
¢
page 1).
¢
page 1) or
on a handset.
key and