Removing The Dc-In Module (Wlan Board) - Acer Aspire S3 MS2346 Service Manual

Removing the DC-In Module (WLAN Board)

NOTE:
1. Perform the
2. Perform the
3. Disconnect the DC-In cable from the WLAN board (1) then release the DC-In cable from
the self adhesive tape securing it (2).
4. Detach the DC-In socket from the upper case.
Machine Maintenance
Downloaded from www.Manualslib.com
NOTE:
For models that have M-SATA board installed, please proceed to page 3-18,
the DC-In Module (M-SATA
"Removing the Lower
"Removing the Battery
Figure 3-18. DC-In Cable (WLAN Board)
Figure 3-19. DC-In
manuals search engine
Board)"
Case" procedure described on page 3-9.
Pack" procedure described on page 3-10.
0
"Removing
3-17