Porsche Cayenne Turbo Driver Manual page 301

Changing a wheel
1. Remove the top wheel bolt.
2. Remove assembly aid from the tool kit and
screw in instead of the wheel bolt.
3. Remove the remaining wheel bolts.
For further information on wheel bolts:
Please observe the chapter "WHEEL BOLTS"
on Page 293.
4. Change wheel.
5. Insert wheel bolts and tighten by hand.
Remove assembly aid, screw in remaining
wheel bolt.
Initially tighten bolts only slightly in diagonally
opposite sequence so that the wheel is
centred.
6. Fill the tyre with air if necessary.
Information on the tyre pressure is provided in
the chapter Technical Data in this Driver's
Manual: Please observe the chapter "TYRE
PRESSURES, COLD" on Page 350.
7. Lower vehicle and remove jack.
8. Tighten wheel bolts in diagonally opposite
sequence.
Note on operation for vehicles with
Tyre Pressure Monitoring
On vehicles with Tyre Pressure Monitoring, the
settings on the multi-purpose display must be
updated after the wheel change:
Please observe the chapter "SETTING TYRE
PRESSURE MONITORING" on Page 131.
Maintenance note
f Immediately after changing a wheel, use
a torque wrench to check the prescribed
tightening torque of the wheel bolts
(160 Nm/118 ftlb.).
Minor Repairs
301