Seagate Wss Nas Recovery - Seagate SRPS20 Administration Manual

Seagate WSS NAS Recovery

Your Seagate WSS NAS features a flash drive on its motherboard. The flash drive has a dedicated recovery
that installs Windows Storage Server 2012 R2 Essentials on Disk 1. You can use the Seagate WSS NAS
Recovery to:
Install Windows Storage Server 2012 R2 Essentials on a diskless Seagate WSS NAS when first configuring
the device.
Install Windows Storage Server 2012 R2 Essentials on a replacement hard drive for Disk 1. Disk 1 is
located in the first bay on the far left.
Troubleshoot problems with the operating system.
For instructions on how to perform a recovery, see the
Impor ng the storage pool a er a Seagate WSS NAS
Recovery
Your storage pool is not available following the Seagate WSS NAS Recovery. Follow the steps below to
import the storage pool.
1. Go to Server Manager > File and Storage Services > Storage Pools.
2. The storage pool should be listed with a warning. Right click the storage pool and select Set Read/Write
Access.
3. Choose your WSS NAS.
4. Right click the virtual disk and choose Attach Virtual Disk. If you have multiple virtual disks, perform the
same action on each one.
5. In Disks, right click the disk and choose Online. If you have multiple disks, perform the same action on
each one.
6. To make certain that the storage pool automatically mounts, launch the Powershell and use the following
command: Get-VirtualDisk | Where-Object {$_.IsManualAttach -eq $True} | Set-VirtualDisk -
IsManualAttach $False
For more details, see the
Seagate WSS NAS Administratio n Guide
Microsoft Technet overview.
Seagate WSS NAS 2-Bay | 4-Bay | 6-Bay User
6/26/15
Manual.
38