Getting Started; Hardware Setup; Seagate Wss Nas Setup Assistant; First Login - Seagate SRPS20 Administration Manual

Ge ng started
Installa on
Your Seagate WSS NAS's installation is divided into two parts:

1. Hardware setup

2. Seagate WSS NAS Setup Assistant

Hardware setup
For instructions on how to add hard drives and connect the WSS NAS to your network, see the
NAS User Manual. The user manual leads directly to the first login to the operating system.
Seagate WSS NAS Setup Assistant
The Windows Storage Sever 2012 R2 Essentials dashboard is a critical management tool for your WSS NAS.
However, it is not available when you first log into the NAS. Follow the required steps in the Seagate WSS
NAS Setup Assistant to make certain that the dashboard is properly installed.

First login

Per the Seagate WSS NAS User
1. From a PC on the same network as the WSS NAS, launch Remote Desktop Connection.
2. Enter the default login: administrator
3. Enter the default password: admin
4. Choose Connect
Two popup windows appear when you first log into the NAS:
Seagate WSS NAS Setup Assistant
Windows Networks (to the right).
You can choose Yes for the Windows Networks popup window.

Seagate WSS NAS Setup Assistant: recommended and required

Seagate WSS NAS Administratio n Guide
Manual, you can access the WSS NAS using Remote Desktop Connection.
6/26/15
Seagate WSS
5