Honeywell dolphin 70e black User Manual page 34

2. Unlock and remove the battery door.
Battery Door Lock
3. Pull the battery latch back and remove the battery.
Battery Latch
4. Insert the new battery and install the battery door. Apply pressure to the edges of the battery door to
ensure the door is properly closed. Engage the door lock. The terminal begins booting as soon as
power is applied.
See battery part number specifications on page 3-12.
Important - All battery and connector doors must be present, undamaged, and properly closed to
maintain the environmental rating of the terminal.
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
2 - 16