Philips DVP3050V/37 User Manual page 11

H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 11
This connection will let you use the features of both the VCR and the DVD Player.
DVD/VCR
Connections
1
Connect a Cable TV or Satellite signal to
the DVD/VCR's ANT -IN (Antenna In) jack.
2
Use an RF coaxial cable (as the one supplied) to connect
the ANT -OUT (Antenna Out) jack on the DVD/VCR to
the IN jack on the Cable Box/Satellite Receiver.
3
Use a second RF coaxial cable to connect the OUT jack on
the Cable Box/Satellite Receiver to the ANTENNA IN jack
on the TV.
4
Plug in the power cord of your TV.Turn on the TV and set it
to channel 3 or 4.
5
Plug in the power cord of the DVD/VCR.You are ready to
turn on the DVD/VCR. Go to page 16 before turning it on.
Remember...
There are two ways to connect your Cable Box/Satellite Receiver to the
DVD/VCR.With the connection on this page:
●
You may watch one channel while recording another. Follow these steps:
1) Put the Cable Box/Satellite Receiver on the same channel as the
DVD/VCR's output channel (03 or 04).The DVD/VCR's output channel
is channel 3 when the DVD/VCR is new.To alternate it between 3 and
4, press and hold (VCR) PLAY B on the front of the DVD/VCR for 3-5
seconds during tape playback. For details, see step 4 on page 9. Set the TV
to the Cable Box/Satellite Receiver output channel (03 or 04).
2) Press VCR to put the DVD/VCR in VCR mode.VCR light will appear
on the front of the DVD/VCR.
3) Press VCR/TV on the remote to choose VCR position.
4) Press SKIP ∑/CH K or SKIP w/CH L to select the channel you
want to record at the DVD/VCR. Press RECORD
recording.
5) Press VCR/TV on the remote once to put the DVD/VCR in TV
position.
6) Select the channel you want to watch at the Cable
Box/Satellite Receiver.
●
When you play a tape or Disc, make sure the Cable Box/Satellite
Receiver is set to the DVD/VCR's output channel (03 or 04).
Set the TV to the Cable Box/Satellite Receiver output channel (03 or
04).
DVD/VCR to Cable Box or Satellite Receiver and TV
Using only basic RF coaxial cables
2
1
Cable
Signal
ANT - IN
ANT-OUT
RF coaxial cable
Hookups (cont'd) 11
Cable Box/Satellite Receiver
IN
OU T
RF coaxial cable
to start the
I
7 5
A N T
/
C A B
L E
3
TV's ANTENNA
IN Jack