Record Settings - Philips DVDR3430V User Manual

RECORD settings

(underlined options are the factory default settings)
Auto Chapter
Marker
Default Recording
Source
DVD Default
Recording Mode
VCR Default
Recording Mode
Automatically divides a recording (title) into chapters by inserting
chapter markers at a specifi c interval. This enables you to access
a specifi c point in the recording quickly.
{ On } – Chapter markers will automatically be
inserted within the title during recording at
every 5 (fi ve) minutes interval.
{ Off } – No chapter marker will be inserted in the
recording.
Defi ne your frequent source of recording. The recorder will
switch to the default source whenever it is turned on.
{ Tuner } – Input source from TV programmes.
{ CAM1 } – Input source from the device connected to
the V1DEO and AUDIO L/R sockets at the
front panel.
{ DV } – Input source from the device connected to
DV IN socket at the front panel.
{ EXT 1 } – Input source from the device connected to
the EXT1 TO TV-I/O SCART socket at the
rear panel.
{ EXT 2 } – Input source from the device connected to
the EXT2 AUX-I/O SCART socket at the
rear panel.
Note: To change the current recording source without changing the
default setting, you can press the SOURCE button on the remote
control.
The recording mode defi nes the picture quality of the DVD
recordings and the maximum recording time on a disc. The
factory default setting is SP.
Record Mode Picture Quality
HQ High Quality
SP Standard Play
Standard Play Plus
SPP
Long Play
LP
Extended Play
EP
SLP Super Long Play
The recording mode defi nes the picture quality of VCR
recordings and the maximum recording time on a VHS tape. The
available recording modes for VCR are SP and LP.
Recording
(continued)
Maximum Recording
Time per Disc (hours)
1
2
2.5
3
4
6
25