Connecting The Video Cables - Philips DVDR3430V User Manual

Step 1: Basic Recorder Connections
ANTENNA
EXT 2
EXT 1
TV
Option 1

Connecting the video cables

This connection enables you to view the
disc playback from the recorder. You
only need to choose one of the options
below to make your video connection.
Option 1: Using a SCART cable
Use a SCART cable (not supplied) to
connect the EXT1 TO TV-I/O socket
on the recorder to the corresponding
SCART input socket on the TV.
Helpful Hints:
– If your TV has several SCART sockets,
select the SCART socket that is suitable for
both video output and video input.
– If your TV displays a selection for the
SCART socket, select 'VCR' as the source for
the SCART socket.
– The EXT2 AUX-I/O socket is intended
only for additional devices.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
VIDEO
(CVBS) Y
S-VIDEO
AUX - I/O
(Y/C) P
L B
AUDIO
R P
R
COMPONENT
TO TV - I/O VIDEO
AUDIO
AUDIO / VIDEO OUT AUDIO / VIDEO OUT 1
OR
OR
Option 2
(continued)
COAXIAL
DIGITAL AUDIO OUT
Option 3
TV
Option 2: Using an S-Video cable
Use an S-video cable (not supplied) to
connect the S-VIDEO OUTPUT
socket on the recorder to the S-Video
input socket (or labelled as Y/C or
S-VHS) on the TV.
Audio connection is required in order
to hear the sound, see next section
"Connecting the audio cables".
Option 3: Using a Video (CVBS)
cable
Use a composite video cable (yellow end
- not supplied) to connect the
VIDEO(CVBS) OUTPUT socket on
the recorder to the video input socket
(or labelled as A/V In, Video In,
Composite or Baseband) on the TV.
Audio connection is required in order
to hear the sound, see next section
"Connecting the audio cables".
~
MAINS