Kenmore 116.10065 Use & Care Manual page 13

ATTACHMENTS
_CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON. This
could cause sparking and damage the
electrical contacts.
ATTACHMENTS ON HANDLE
NOTE: If the multi- \\tl
surface nozzle is Handle
attached, turn off A_
and unplug vacuum
cleaner before
removing handle Handle j_
Quick IT
from wands. Release
1. Presshandle
quick release
button and pull
up Wand_'
on handle.
/
2. Slide attachments firmly on handle as
needed. See ATTACHMENT USE TABLE
(page 13).
ATTACHMENTS ON WANDS
1. Turn off and unplug vacuum cleaner
before removing wands from multi-surface
nozzle.
2. Presswand quick release button and
pull the wands straight up and out of
multi-surface nozzle.
--Wand Quick
Release Button
3. Put attachments on wand as needed.
See ATTACHMENT USETABLE (page 13).
ATTACHMENT USE TABLE
CLEANING AREA
Between Bare Carpeted
ATTACHMENT
Furniture' Cushions' Drapes t Stairs El . ... Floors/Rugs Walls
Crevice tool _ _, _, _,
Dusting brush _ _' _' _' _'
Multl-surfaCenozzle _ v' 2 v' 2 v'
2
1. Always clean attachments before using on fabrics.
2. 3-way switch shouldbe in BRUSH position.
- 13 -