Pair Devices - Nokia N75 User Manual

• When is blinking, your device is trying to connect
with another device.
• When is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity,
select Notes, write the text, and select
Send > Via Bluetooth.
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, select
2 Select the item and Options
Devices with Bluetooth wireless technology within
range start to appear on the display.
Device icons: computer,
video device, and other device.
To interrupt the search, select Stop.
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See "Pair devices," p. 109.
5 When the connection has been established,
data is shown.
The Sent folder in Messag.
using Bluetooth connectivity.
Options >
My Stuff.
> Send > Via Bluetooth.
phone, audio or
Sending
does not store messages sent
Tip! When searching for devices, some devices may
show only the unique address (device address).
To find the unique address of your device, enter
the code *#2820# in the idle mode.

Pair devices

To open the paired devices view (
application main view, press
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select
Devices with Bluetooth wireless technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
Paired devices are indicated by
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
Set as authorized—Connections between your device and
this device can be made without your knowledge. No separate
acceptance or authorization is needed. Use this status for
your own devices, such as your compatible headset or PC,
or devices that belong to someone you trust.
authorized devices in the paired devices view.
), in the Bluetooth
.
Options > New paired device.
in the device search.
indicates
109