Installing A Hard Drive Into A Hard Drive Carrier - Dell PowerEdge T30 Owner's Manual

Figure 26. Removing a hard drive from a hard drive carrier
Next steps
1 Install the hard drive in the hard drive cage or hard drive bay.
2 Connect the power and data cables to the hard drive
3 Follow the procedure listed in the After working inside your system section.
Related links
Before working inside your system
Removing a 3.5-inch hard drive carrier from the hard drive bay

Installing a hard drive into a hard drive carrier

After working inside your system
Installing a hard drive into a hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
62 Installing and removing system components