Index - Siemens MICROMASTER 430 Operating Instructions Manual

Issue 10/06

Index

A
Access Levels...........................................68
Adaptation of fan voltage..........................35
Altitude......................................................20
Ambient operating conditions
Altitude ..................................................20
Atmospheric Pollution ...........................21
Electromagnetic Radiation....................21
Humidity Range ....................................20
Installation und Kühlung .......................21
Shock ....................................................20
Vibration................................................20
Water hazard ........................................21
Ambient operating conditions ...................20
Applicable standards
European EMC Directive ....................102
European Low Voltage Directive ........102
European Machinery Directive............102
ISO 9001.............................................102
Underwriters Laboratories ..................102
Atmospheric pollution ...............................21
B
Basic operation
changing parameters with BOP-2.........49
external motor thermal overload
protection ........................................53, 55
general ..................................................54
with BOP-2............................................54
with SDP ...............................................45
Belt Failure Detection ...............................63
BOP-2
default settings with BOP-2 ..................47
operation with BOP-2............................47
Bypass Mode............................................62
C
Commissioning .........................................39
Compound braking ...................................60
connection drawing – frame size FX ........32
connection drawing – frame size GX........33
Connection Terminals ..............................31
Contact address .........................................5
Control modes ..........................................61
MICROMASTER 430 Operating Instructions
6SE6400-5AE00-0BP0
Current reduction depending on pulse
frequency.............................................. 77
D
DC braking ............................................... 60
Default settings ........................................ 47
Dimensions and Torques......................... 26
Drill pattern for MICROMASTER 440 ...... 23
E
Electrical Installation ................................ 28
Electro-Magnetic Compatibility
EC type-examination certificate ........... 86
general ........................................... 85, 86
self-certification .................................... 86
technical construction file ..................... 86
Electro-Magnetic Interference.................. 36
avoiding EMI......................................... 36
Electromagnetic radiation ........................ 21
EMC ......................................................... 86
EMC Directive Compliance...................... 86
EMC performance
filtered for residential, commercial and
light industry ......................................... 89
filtered industrial class .......................... 88
general industrial class......................... 87
EMI........................................................... 36
Energy Saving Mode................................ 65
F
Fan fuses ................................................. 35
Fault messages
with the BOP-2 fitted ............................ 73
with the SDP fitted................................ 72
Faults and Alarms
with BOP-2 ........................................... 66
with SDP............................................... 66
Features................................................... 15
flux current control (FCC ) ....................... 61
Foreword.................................................... 5
Free Function Blocks ............................... 66
Frequency set point ................................. 58
http://nicontrols.com
Index
111