Communications Log; Action Log - Siemens SINUMERIK 840D Operator's Manual

9
Messages, Service Displays, PLC Data – Operating Area Diagnosis
9.4 Service displays

9.4.3 Communications log

9.4.4 Action log

9-108
Function
The following working window logs the communications between the
HMI and NCK/PLC. Date and time are output at the start of
communications.
Softkeys
Same as Service Displays working window.
Function
You can display an existing action log.
This function is only intended for service purposes.
Softkeys
Same as Service Displays working window.
Further buttons
Curr. data The displayed data are updated
Data RS-232-C Transfer of the data via RS-232-C
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
9
03.04
 Siemens AG, 2004. All rights reserved.