Messages - Siemens SINUMERIK 840D Operator's Manual

9
03.04
9.3

Messages

9.4 Service displays
 Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
Messages, Service Displays, PLC Data – Operating Area Diagnosis
Function
Similarly to the alarms, messages can be displayed after pressing the
Messages softkey in the Alarms working window.
Operating sequence
There are no operations other than reading the messages.
Further buttons
Alarms

Messages

Function
This is a pure display function, which means that data cannot be
changed. There are:
• Service axes display,
• System resources (NC utilization)
• Communications log
• Action log
• NCU and HMI version information
The following working window appears once the Service Displ.
softkey has been pressed in the Diagnostics Operating Area working
window.
Service Displays working window
Operating sequence
• Select the desired function via the corresponding softkey.
9.3 Messages
Alarms working window
Updates the working window
9
9-105