Nc Utilization - Siemens SINUMERIK 840D Operator's Manual

9
03.04

9.4.2 NC utilization

 Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
Messages, Service Displays, PLC Data – Operating Area Diagnosis
Precondition
The System Res. softkey has been pressed in the Service Displays
working window.
The following working window is then displayed:
Net NC Utilization working window
Function
In this window the net runtime (pure computation time) is displayed
for the NC.
Further buttons
Channel -/+ Displays information about the previous/next channel
Stop Number refresh is stopped, numerical values stop.
Start Number refresh is restarted (inverted on selection).
→ Service Displays working window
Recall
9.4 Service displays
9
9-107