Setting Items For Scanning Using Operation Panel - Canon MB2100 SERIES Online Manual

Setting Items for Scanning Using Operation Panel

You can change the scan settings such as the scan size, resolution, or data format.
When the Scan standby screen is displayed, press the right Function button to select the setting item. Use
the button to select the setting item, use the
button.
Note
• When you forward the scanned data to the computer using WSD (one of the network protocols
supported in Windows 10, Windows 8.1, Windows 8, Windows 7, and Windows Vista), you cannot
specify the scan setting.
• Depending on the destination, some setting items cannot be selected. This section describes the
setting items when you select USB flash drive on the screen for selecting to which you save the data.
The setting item which cannot be selected is displayed grayed out.
• Some settings cannot be specified in combination with the setting of other setting item, the document
type selected for Doc.type, or the scan menu on the screen for selecting to which you save the data. If
the setting which cannot be specified in combination is selected, Error details appears on the LCD and
appears at the setting item. In this case, press the left Function button to check the message and
change the setting.
• The specified scan settings such as the scan size, resolution, and data format are retained even if the
printer is turned off.
• When scanning starts in the scan menu that is not available with the specified setting, The specified
function is not available with current settings. is displayed on the LCD. Change the setting,
following the on-screen instructions.
• For setting items or procedure for scanning from the computer:
• For Windows:
Settings Dialog Box
Using IJ Scan Utility
• For Mac OS:
Settings Dialog
Using IJ Scan Utility
1. Scan size
Select the size of the original.
button to specify the setting, and then press the OK
888