Subaru LEGACY 2001 Service Manual page 5

B: COMPONENT
(1) Spark plug
(2) Ignition coil and ignitor ASSY
C: CAUTION
S141001A03
¼ Wear working clothing, including a cap, protec-
tive goggles, and protective shoes during opera-
tion.
¼ Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
¼ Keep the disassembled parts in order and pro-
tect them from dust or dirt.
¼ Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary
GENERAL DESCRIPTION
S141001A05
IG(H6)-3
Tightening torque: N·m (kgf-m, ft-lb)
T1:
T2:
removal, installation, disassembly, and replace-
ment.
¼ Be careful not to burn your hands, because each
part on the vehicle is hot after running.
¼ Be sure to tighten fasteners including bolts and
nuts to the specified torque.
¼ Place shop jacks or safety stands at the speci-
fied points.
¼ Before disconnecting electrical connectors of
sensors or units, be sure to disconnect negative
terminal from battery.
Ignition
B2M4330A
16 (1.6, 12)
21 (2.1, 15)