Pioneer DEH-80PRS Operation Manual page 38

Section
02 Operating this unit
3 Turn M.C. to display Key or Display.
Press to select.
4 Press M.C. and hold until the customiz-
ing illumination color setting appears in
the display.
5 Press M.C. to select the primary color.
R (red)—G (green)—B (blue)
6 Turn M.C. to adjust the brightness level.
Adjustment range: 0 to 60
# You cannot select a level below 20 for all three
of R (red), G (green), and B (blue) at the same
time.
# You can also perform the same operation on
other colors.
Notes
! You cannot create a custom illumination color
when SCAN or a set of colors (WARM,
AMBIENT, or CALM) is selected.
! You can create custom illumination colors for
both Key and Display.
Switching the display
indication and button
illumination
Display indication and button illumination can
be switched on or off.
% Press and hold EQ/DISP OFF.
Pressing and holding EQ/DISP OFF switches
the display indication and button illumination
on or off.
# Even if the display indication is turned off, op-
eration can be conducted. If operation is con-
ducted while the display indication is off, display
will light up for a few seconds and then turn off
again.
38
En